Cisco Aggregation Services Router 9000 Series Essentials
Overview
Cisco Aggregation Services Router 9000 Series Essential version 4 instructor-led course introduces you to the features and functions of the Cisco ASR 9000 Series platforms. Through a combination of lecture and hands-on labs, you will gain an understanding of all major aspects of the platform, including hardware; software; Layer 2 and Layer 3 services; Layer 2 and Layer 3 multicast; operations, administration, and management (OAM); quality of service (QoS) features; and network virtualization.
Prerequisites:
Following are the prerequisites for this course:
- Basic knowledge of router installation and some experience with installation tools
- Routing protocol configuration experience with BGP, Intermediate System-to-Intermediate System (IS-IS), and Open Shortest Path First (OSPF)
- Knowledge of Layer 2 IEEE switching and related protocols
- Strong knowledge of MPLS configuration or multicast configuration experience
- Experience troubleshooting Cisco routers in a large network environment
Target Audience:
This course is designed for technical professionals who need to know how to deploy the Cisco ASR 9000 Series routers in their network environment. The primary audience for this course includes:
- System engineers
- Technical support personnel
- Channel partners, resellers
Course Objectives:
- Major features and benefits of a Cisco ASR 9000 Series router
- Major features and benefits of the Cisco IOS XR Software operating system
- Data flow through the Cisco ASR 9000 Series router
- Configure the Cisco ASR 9000, back out of configuration changes, and restore older versions of the configuration
- Install the Cisco IOS XR operating system, package information envelopes (PIEs), and software maintenance updates (SMUs)
- Enable multicast routing on a Cisco ASR 9000 Series router
- Configure Multiprotocol Label Switch-Traffic Engineering (MPLS-TE) on a Cisco ASR 9000 Series router
- Configure Layer 3 VPN services
- Configure Ethernet link bundles
- Configure local E-Line L2VPN
- Configure Ethernet over MPLS E-Line L2VPN
- Configure EoMPLS with pseudowire backup
- Configure local E-LAN L2VPN
- Configure link-based Ethernet operations, administration, and maintenance (E-OAM)
- Configure virtual private LAN service (VPLS) L2VPN
- Configure VPLS with Border Gateway Protocol (BGP) autodiscovery
- Configure service-based connectivity fault management (CFM)
- Multiple Spanning Tree-Access Gateway (MST-AG)
- Configure Layer 2 multicast features
- Basic QoS implementation
- How to configure and verify network virtualization (nV) on the ASR 9000 series
Course Outline:
- Module 1: Introduction to the Cisco ASR 9000 Series Aggregation Series Routers
- Module 2: Cisco ASR 9000 Hardware
- Module 3: Cisco IOS XR Software Overview
- Module 4: Cisco IOS XR Software Configuration Basics
- Module 5: Cisco IOS XR Software Installation
- Module 6: Cisco IOS XR Software Operations
- Module 7: Cisco IOS XR Routing Protocols
- Module 8: Layer 3 Multicast
- Module 9: Cisco IOS XR MPLS
- Module 10: Cisco IOS XR Layer 3 VPN
- Module 11: Cisco ASR 9000 Layer 2 Architecture
- Module 12: Cisco ASR 9000 Point-to-Point Layer 2 Services
- Module 13: Cisco ASR 9000 Multipoint Layer 2 Services
- Module 14: Cisco ASR 9000 Operation, Administration, and Maintenance
- Module 15: Cisco ASR 9000 Layer 2 Multicast
- Module 16: Cisco ASR 9000 QoS
- Module 17: Cisco ASR 9000 Network Virtualization